Instructions and code to add a 90-day captcha cookie to SearxNG. The captcha engine can be self hosted. Automated reporting of bots to AbuseIPDB. This setup eliminated the abuse by bots of my instance completely.
Updated 2026-06-16 01:34:24 +00:00
This is an adapter for North European propane/butane/lpg tanks, to connect a 9mm hose directly to the tank.
The official name of this tank connection is "POL / W21.8mm x 1/14 inch LeftHand thread".
Updated 2026-05-25 04:35:21 +00:00
Some 3D designs for repairs on the Yamaha F25 and alike engines.
Updated 2026-04-26 14:11:22 +00:00
A generic control module based on an ATTiny microcontroller, used for many of our projects.
It features a touch button, an indication LED, two inputs, two outputs, one of which can switch on the high and low side, both 20 amps.
Updated 2026-04-09 00:57:13 +00:00
Hardware used by the RefrigeratorOptimizer and HotWaterManager
Updated 2026-03-19 01:18:02 +00:00
Automatic Position Updater for NFL, using the NMEA stream of the boat.
Updated 2026-02-10 14:33:17 +00:00
I wrote this Perl script to forward the filtered output of my AIS receiver to AIS aggregators like MarineTraffic.
Updated 2026-02-10 14:31:02 +00:00
Bearing Caps and Zinc Savers for the autoprop
Updated 2026-01-28 12:57:06 +00:00
Lost or broke your jerrycan cap? Just print a new one with my generic 3D design.
Updated 2026-01-24 01:00:09 +00:00
Sliding door control, with keypad, fingerprint reader, hal sensor, motor control, etc.
Updated 2025-12-29 16:58:32 +00:00
Some 3D designs to repair or upgrade your Vetus cabinet/drawer locks
Updated 2025-11-27 06:18:15 +00:00
A 3D printer project to print your own rope hook and optionally matching deck mount.
Updated 2025-11-27 06:17:47 +00:00
Some 3D designs for the Yanmar engines and saildrives, like ignition key, stop knob, and saildrive seal shim.
Updated 2025-11-27 06:17:24 +00:00
Leaflet for Sailors to prevent corruption when entering, transiting, or leaving Indonesian waters.
Updated 2025-09-23 05:47:18 +00:00
This is an Anderson PowerPole socket with backlight. We decided to not sell these, but instead to make them available to the public for DIY 3D printing.
Updated 2025-08-14 10:58:08 +00:00
A replacement/improvement of the strap for the Mantis M2 Chain Hook.
Updated 2025-04-09 00:28:50 +00:00
A control module to manage the Hot Water system on boats.
Updated 2025-04-02 09:08:32 +00:00
USB controlled In Circuit Serial Programmer, based on an ATTiny microcontroller.
Updated 2025-02-27 16:40:25 +00:00
A basic open source BMS for yachts, based on the Arduino architecture.
Updated 2024-08-22 09:31:29 +00:00
Updated 2024-07-06 03:11:25 +00:00