Sliding door control, with keypad, fingerprint reader, hal sensor, motor control, etc.
Updated 2025-12-29 16:58:32 +00:00
A generic control module based on an ATTiny microcontroller, used for many of our projects.
It features a touch button, an indication LED, two inputs, two outputs, one of which can switch on the high and low side, both 20 amps.
Updated 2025-12-22 04:34:49 +00:00
Hardware used by the RefrigeratorOptimizer and HotWaterManager
Updated 2025-12-22 04:03:01 +00:00
Some 3D designs for repairs on the Yamaha F25 and alike engines.
Updated 2025-11-27 06:45:18 +00:00
Some 3D designs to repair or upgrade your Vetus cabinet/drawer locks
Updated 2025-11-27 06:18:15 +00:00
Lost or broke your jerrycan cap? Just print a new one with my generic 3D design.
Updated 2025-11-04 23:33:41 +00:00
Leaflet for Sailors to prevent corruption when entering, transiting, or leaving Indonesian waters.
Updated 2025-09-23 05:47:18 +00:00
Automatic Position Updater for NFL, using the NMEA stream of the boat.
Updated 2025-09-19 00:14:35 +00:00
This is an Anderson PowerPole socket with backlight. We decided to not sell these, but instead to make them available to the public for DIY 3D printing.
Updated 2025-08-14 10:58:08 +00:00
A replacement/improvement of the strap for the Mantis M2 Chain Hook.
Updated 2025-04-09 00:28:50 +00:00
A control module to manage the Hot Water system on boats.
Updated 2025-04-02 09:08:32 +00:00
USB controlled In Circuit Serial Programmer, based on an ATTiny microcontroller.
Updated 2025-02-27 16:40:25 +00:00
A basic open source BMS for yachts, based on the Arduino architecture.
Updated 2024-08-22 09:31:29 +00:00
Updated 2024-07-06 03:11:25 +00:00
I wrote this Perl script to forward the filtered output of my AIS receiver to AIS aggregators like MarineTraffic.
Updated 2024-07-06 02:49:02 +00:00
Members 1
